Impact of a Static Magnetic Field on Early Osseointegration: A Pilot Study in Canines.

A static magnetic field generated by neodymium-iron-boron (NdFeB) magnets placed in the inner cavity of dental implants can enhance bone regeneration in rabbits. It is, however, unknown whether static magnetic fields support osseointegration in a canine model. We therefore determined the potential osteogenic effect of implants carrying NdFeB magnets inserted in the tibia of six adult canines in the early stages of osseointegration. Here, we report that after 15 days of healing, magnetic and regular implants showed a high variation with a median new bone-to-implant contact (nBIC) in the cortical (41.3% and 7.3%) and the medullary (28.6% and 44.8%) region, respectively. Consistently, the median new bone volume/tissue volume (nBV/TV) in the cortical (14.9% and 5.4%) and the medullary (22.2% and 22.4%) region were not significantly different. One week of healing only resulted in negligible bone formation. These findings suggest that considering the large variation and the pilot nature of this study, magnetic implants failed to support peri-implant bone formation in a canine model.

Improved access to the bone marrow space by multiple perforations of the alveolar bundle bone after tooth extraction-A case report.

OBJECTIVES: The dental alveolus is lined by a thin cortical layer ("bundle bone", "alveolar bone proper", "cribriform plate", "lamina dura"), that can impede access to the bone marrow and its vasculature. During unassisted socket healing, the alveolar bundle bone is gradually resorbed allowing tissue resources from the bone marrow to enter into the socket space. An optimized wound healing process, either during unassisted socket healing or during ridge preservation procedures, with autogenous bone and/or any bone/collagen substitute material, depends at least partly on an adequate vascularization of the socket space. This ensures sufficient recruitment of osteoblast and osteoclast precursor cells and facilitates fast bone regeneration and/or uneventful integration of the augmentation material. METHODS: The present technical note describes an easy treatment step after tooth extraction aiming to improve socket healing with or without any ridge preservation procedure, by facilitating an increased blood inflow into the dental alveolus. Specifically, after tooth extraction the alveolar bundle bone is perforated several times - mainly in a palatally/lingually - by a small round bur (diameter < 1 mm) extending into the trabecular bone. RESULTS AND CONCLUSIONS: By means of this relatively simple treatment step, an increased blood inflow into the alveolus is achieved after tooth extraction, which might enhance socket healing and corticalization of the entrance, and in turn result in a lower complication rate (e.g., dry socket), in an enhanced graft incorporation, and/or in a reduced loss of alveolar ridge volume.

Bone regeneration in rat calvarial defects using dissociated or spheroid mesenchymal stromal cells in scaffold-hydrogel constructs.

BACKGROUND: Three-dimensional (3D) spheroid culture can promote the osteogenic differentiation of bone marrow mesenchymal stromal cells (BMSC). 3D printing offers the possibility to produce customized scaffolds for complex bone defects. The aim of this study was to compare the potential of human BMSC cultured as 2D monolayers or 3D spheroids encapsulated in constructs of 3D-printed poly-L-lactide-co-trimethylene carbonate scaffolds and modified human platelet lysate hydrogels (PLATMC-HPLG) for bone regeneration. METHODS: PLATMC-HPLG constructs with 2D or 3D BMSC were assessed for osteogenic differentiation based on gene expression and in vitro mineralization. Subsequently, PLATMC-HPLG constructs with 2D or 3D BMSC were implanted in rat calvarial defects for 12 weeks; cell-free constructs served as controls. Bone regeneration was assessed via in vivo computed tomography (CT), ex vivo micro-CT and histology. RESULTS: Osteogenic gene expression was significantly enhanced in 3D versus 2D BMSC prior to, but not after, encapsulation in PLATMC-HPLG constructs. A trend for greater in vitro mineralization was observed in constructs with 3D versus 2D BMSC (p > 0.05). In vivo CT revealed comparable bone formation after 4, 8 and 12 weeks in all groups. After 12 weeks, micro-CT revealed substantial regeneration in 2D BMSC (62.47 ± 19.46%), 3D BMSC (51.01 ± 24.43%) and cell-free PLATMC-HPLG constructs (43.20 ± 30.09%) (p > 0.05). A similar trend was observed in the histological analysis. CONCLUSION: Despite a trend for superior in vitro mineralization, constructs with 3D and 2D BMSC performed similarly in vivo. Regardless of monolayer or spheroid cell culture, PLATMC-HPLG constructs represent promising scaffolds for bone tissue engineering applications.

Ancient DNA reveals monozygotic newborn twins from the Upper Palaeolithic.

The Upper Palaeolithic double burial of newborns and the single burial of a ca. 3-month-old infant uncovered at the Gravettian site of Krems-Wachtberg, Austria, are of paramount importance given the rarity of immature human remains from this time. Genome-wide ancient DNA shows that the male infants of the double grave are the earliest reported case of monozygotic twins, while the single grave´s individual was their 3rd-degree male relative. We assessed the individuals´ age at death by applying histological and µCT inspection of the maxillary second incisors (i2) in conjunction with C- and N-isotope ratios and Barium (Ba) intake as biomarker for breastfeeding. The results show that the twins were full-term newborns, and that while individual 2 died at birth, individual 1 survived for about 50 days. The findings show that Gravettian mortuary behaviour also included re-opening of a grave and manipulation of its layout and content.

Anatomical similarity between the Sost-knockout mouse and sclerosteosis in humans.

Sclerosteosis, a rare autosomal recessive genetic disorder caused by a mutation of the Sost gene, manifests in the facial skeleton by gigantism, facial distortion, mandibular prognathism, cranial nerve palsy, and, in extreme cases, compression of the medulla oblongata. Mice lacking sclerostin reflect some symptoms of sclerosteosis, but this is the first report of the effect on the facial skeleton. We used geometric morphometrics (GMM) to analyze the deformations of the murine facial skeleton from the wild-type to the Sost gene knockout. Landmark coordinates were obtained by surface reconstructions from micro-computed tomography. Centroid size, principal component scores in shape space and form space, and asymmetry were computed by the standard GMM formulas, and dental and skeletal jaw lengths were examined as ratios. We show here that, compared to wild type controls, mice lacking Sost have larger centroid size (effect size, p-value: 4.59, <.001), higher mean asymmetry (1.14, .065), dental and skeletal mandibular prognathism (1.36, .010 and 5.92, <.001), a smaller foramen magnum (-1.71, .015), and calvaria that are more highly curved (form space p = 4.09, .002; shape space p = 12.82, .002). These features of mice lacking sclerostin largely correspond to the changes of the facial skeleton observed in sclerosteosis. This alignment further supports claims that the Sost gene plays a fundamental role in bony facial development in rodents and humans alike.

Impaired periodontium and temporomandibular joints in tumour necrosis factor-α transgenic mice.

AIM: Tumour necrosis factor (TNF)-α is a pathological factor causing the characteristic symptoms of periodontal disease and rheumatoid arthritis. In this study, we describe the phenotypes of human TNF-α transgenic mice (hTNFtg) with respect to their periodontium and the temporomandibular joint (TMJ). MATERIAL AND METHODS: Periodontal structures, TMJ and skull shape of hTNFtg mice and wild-type (WT) littermates were assessed by microcomputed tomography, automated segmentation, geometric morphometrics and histologic ground sections. RESULTS: We show that hTNFtg mice have an eroded lamina dura and reduced periodontal ligament space compared to (WT) littermates. Transgenic mice further exhibit severe destruction of the TMJ. Geometric morphometrics revealed that hTNFtg mice have a more laterally positioned TMJ with a concomitantly enlarged zygomatic process. Mandibular and maxillary teeth occluded properly. CONCLUSIONS: Our findings suggest that chronic inflammation in hTNFtg mice causes destructive changes of the periodontium and the TMJ.

Effect of recombinant PDGF-BB on bone formation in the presence of ß-tricalcium phosphate and bovine bone mineral matrix: a pilot study in rat calvarial defects.

BACKGROUND: Supplementation of bone substitutes with recombinant platelet-derived growth factor-BB (PDGF-BB) can enhance bone regeneration. The aim of the study was to evaluate the effect of PDGF-BB on bone formation in the presence of ß-tricalcium phosphate and bovine bone mineral matrix in a rat calvaria defect model. METHODS: The authors examined 5 mm rat calvarial defects treated with ß-tricalcium phosphate (TCP) or demineralized bovine bone mineral (DBBM) with and without 0.3 mg/ml recombinant PDGF-BB. Calvaria defects were randomly divided into the following treatment groups (n = 5); TCP; TCP plus PDGF-BB; DBBM; DBBM plus PDGF-BB; and untreated empty control. After 45 days, bone formation was evaluated by histomorphometry and fluorescence microscopy. RESULTS: The authors report that the area of newly formed bone was similar between the empty controls and the two bone substitutes, TCP and DBBM. Supplementation of TCP and DBBM with PDGF-BB had no significant impact on bone formation. Fluorochrome staining revealed no visible changes in the pattern of bone formation in defects filled with TCP and DBBM, irrespective of PDGF-BB. Furthermore, supplementation with PDGF-BB did not influence biomaterial degradation. CONCLUSIONS: The authors concluded that PDGF-BB had no impact on bone formation and degradation of bone substitutes in the respective rodent models. Thus, possible beneficial effects of PDGF-BB may require other model situations.

The Effect of Parathyroid Hormone on Osseointegration in Insulin-Treated Diabetic Rats.

OBJECTIVES: Uncontrolled diabetes mellitus is associated with impaired osseointegration. Diabetic individuals might benefit from bone anabolic therapies. Intermittent administration of 1-34 parathyroid hormone (PTH) stimulates bone formation in rodent models. However, this anabolic effect fails in diabetic rats. Whether the anabolic effect of PTH can be achieved in insulin-controlled diabetic rats has not been investigated yet. MATERIALS AND METHODS: After diabetes induction with streptozotocin in 40 female Wistar rats, the animals were randomly divided into 4 groups: diabetes, diabetes plus PTH, insulin-treated diabetes, and insulin-treated diabetes plus PTH. After 1 week, miniscrews were inserted in the tibiae. Osmotic pumps with insulin or saline solution were implanted. Animals received 60 mg/kg PTH or saline solution. Histomorphometric analysis was performed. RESULTS: In diabetic rats, no changes of medullary periimplant bone area or bone-to-implant contacts (BICs) were achieved with or without treatment with PTH. However, also animals treated with insulin failed to response significantly to PTH regarding bone area (7.4 ± 4.1% and 8.1 ± 4.1%) and BICs (33.7 ± 16.9% and 49.9 ± 11.9%). CONCLUSION: These results demonstrate that the metabolic characteristics of the diabetic rats produced a condition unable to respond to PTH treatment, even when hyperglycemia was controlled with insulin.

Assessment of Artificial Teeth Setup Device: A Three-Dimensional Model Analysis.

This study assessed the use of the commercial artificial teeth setup device Staub Cranial System (Neu-Ulm) in Asian subjects. Fourteen completely dentate Thai volunteers were randomly recruited. Study casts (control group) and duplicated casts (experimental group) of all subjects were prepared. Artificial teeth were replaced on duplicated casts according to the manual. Computed tomography scans of all casts were performed. Intercanine width, intermolar width, incisocervical length, and occlusal plane were investigated. The length of the natural mandibular left central incisor was smaller than the reconstructed one. The reconstructed occlusal plane was more parallel to the hamular-incisive papilla plane than that of the control group.

Radiological assessment of the inferior alveolar artery course in human corpse mandibles.

OBJECTIVES: CT assessment of the entire course of the inferior alveolar artery (IAA) within the mandibular canal. METHODS: After contrast medium injection (180 or 400 mg/ml iodine concentration) into the external carotid arteries of 15 fresh human cadaver heads, the main IAA's position in the canal (cranial, buccal, lingual or caudal) was assessed in dental CT images of partially edentulous mandibles. RESULTS: The course of the main IAA could be followed at both iodine concentrations. The higher concentration gave the expected better contrast, without creating artefacts, and improved visibility of smaller arteries, such as anastomotic sections, dental branches and the incisive branch. The main IAA changed its position in the canal more often than so far known (mean 4.3 times, SD 1.24, range 2-7), but with a similar bilateral course. A cranial position was most often detected (42 %), followed by lingual (36 %), caudal (16 %) and buccal ( 6 %). CONCLUSIONS: With this non-invasive radiologic method, the entire course of the main IAA in the mandibular canal could be followed simultaneously with other bone structures on both sides of human cadaver mandibles. This methodology allows one to amend existing anatomical and histological data, which are important for surgical interventions near the mandibular canal. KEY POINTS: • Contrast medium injection displayed the inferior alveolar artery's course on mandibular CTs • An iodine concentration of 400 mg/ml enabled visibility until the chin • Frequent position changes of the artery in the mandibular canal were detected • Cranial and lingual positions were most often determined • Course similarities on the respective left and right sides were found.

Dental and periodontal phenotype in sclerostin knockout mice.

Sclerostin is a Wnt signalling antagonist that controls bone metabolism. Sclerostin is expressed by osteocytes and cementocytes; however, its role in the formation of dental structures remains unclear. Here, we analysed the mandibles of sclerostin knockout mice to determine the influence of sclerostin on dental structures and dimensions using histomorphometry and micro-computed tomography (µCT) imaging. µCT and histomorphometric analyses were performed on the first lower molar and its surrounding structures in mice lacking a functional sclerostin gene and in wild-type controls. µCT on six animals in each group revealed that the dimension of the basal bone as well as the coronal and apical part of alveolar part increased in the sclerostin knockout mice. No significant differences were observed for the tooth and pulp chamber volume. Descriptive histomorphometric analyses of four wild-type and three sclerostin knockout mice demonstrated an increased width of the cementum and a concomitant moderate decrease in the periodontal space width. Taken together, these results suggest that the lack of sclerostin mainly alters the bone and cementum phenotypes rather than producing abnormalities in tooth structures such as dentin.

Osteocyte lacunar density and area in newly formed bone of the augmented sinus.

OBJECTIVES: Osteocytes, the most common cells of the bone, are buried in lacunae. Density and area of the osteocyte lacunae change with increasing maturation of the newly formed bone. Evaluation of osteocyte lacunae can therefore provide insights into the process of graft consolidation. MATERIALS AND METHODS: Here, we determined the osteocyte lacunar density (number of osteocyte lacunae per bone area; N.Ot/BAr) and the osteocyte lacunar area in µm(2) (Lac.Ar) in histological specimens 6 and 12 weeks after the sinuses of 10 minipigs were augmented with Bio-Oss(®) , a deproteinized bovine bone mineral, and Ostim(®) , an aqueous paste of synthetic nanoparticular hydroxyapatite. The region of interest was defined by the following criteria: (i) >1 mm from the host bone, (ii) >0.5 mm from the sinus mucosa, (iii) minimum area of 0.2 mm(2) , and (iv) bone tissue spanning at least two bone substitute particles. RESULTS: The overall osteocyte lacunar density was significantly higher in the Bio-Oss(®) group than in the Ostim(®) group and decreased during the observation period at a similar range in both groups. The osteocyte lacunar area was smaller in the Bio-Oss(®) group than the Ostim(®) group but there was no significant change within the groups over time. CONCLUSIONS: These results suggest that bone substitutes affect the osteocyte lacunar density and the osteocyte lacunar area in the newly formed bone within the augmented sinus in this particular model situation. These measures can provide insights into the maturation of newly formed bone in the augmented sinus.